Ironwood-electronics GHZ BGA Socket (direct mount - hardware) Assembly User Manual download pdf

Socket Base

Target PCB with SMT pads

Socket

Top Assembly

Compression Screw

Compression plate

BGA Package

Angle wire elastomer

Socket Lid

Round head Screw

Dowel pin

Socket Base Assembly

Backing Plate

(not necessary for

some sockets)

Hex Nut

Nylon Washer

IC Frame

GHZ BGA Socket (direct mount - hardware)

Assembly Instructions

Tele: (800) 404-0204

www.ironwoodelectronics.com

1. Install the socket base assembly on the target PCB with the hardware (round head 0-80 screws and nuts) provided (see Detail A for

orientation).

2. Place BGA package (solder ball side down) into the socket. NOTE: BGA orientation on target PCB is critical. If IC frame (optional)

supplied, place it over the BGA package.

3. Place the compession plate on top of the BGA package.

4. Install the socket top assembly on to the socket base assembly and swivel to lock into the position.

5. Turn the compression screw clockwise, until it makes contact with the compression plate or the BGA package.

6. Apply apropriate torque as specified on page 1 of the part drawing. If torquedriver is not available necessary hex keys will be

supplied with the socket. Use hex key to turn an additional 1/8th of a turn to 1/4th of a turn.

Tooling holes have to be designed into the target PCB for this version of the GHz BGA socket

Filename: GHZ.mcd, Rev A, 7/17/01, IP

Rev B, 7/20/01, IP

Rev C, 9/19/01, IP

Rev. D, 10/22/03, HH

Page 1 of 1

Socket BaseTarget PCB with SMT padsSocketTop AssemblyCompression ScrewCompression plateBGA PackageAngle wire elastomerSocket LidRound head ScrewDowel

No comments

Ironwood-electronics GHZ BGA Socket (direct mount - hardware) Assembly User Manual